复合材料强度

复合材料强度

周晔欣, 著

出版社:浙江大学出版社

年代:2011

定价:130.0

书籍简介:

本书是第一本采用公式化理论对各种纤维增强复合材料强度进行分析计算的英文专著,内容包括桥联模型理论发展,单向复合材料的强度公式,单向复合材料受双轴和三向应力作用的强度,单向复合材料的寿命计算,层合板在热-机械耦合载荷下的强度,层合板的强度谱与寿命计算,层合板在三向压应力下的破坏与强度,金属基复合材料在热-机械交变载荷下的响应曲线,层合板的弯曲强度,机织与编织复合材料在各种组合载荷作用下的强度,以及层合板和编织与机织复合材料在各种载荷作用下的破坏分析与极限强度计算的两个计算机源程序,附录给出了采用所给计算机程序分析书中例题的全部输入数据。

作者介绍:

Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China.Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

书籍目录:

1 Background

1.1 Scope of This Book

1.2 Linear Elasticity

1.2.1 Isotropic Material

1.2.2 Transversely Isotropic Material

1.2.3 Orthotropic Material

1.3 Basic Concepts

1.3.1 Representative Volume Element (RVE)

1.3.2 Volume Averaged Stress and Strain

1.3.3 Maximum Fiber Volume Fraction

1.4 Micromechanics

1.4.1 Rule of Mixture Formulae

1.4.2 Chamis Formulae

1.4.3 Hill-Hashin-Christensen-Lo Formulae

1.5 Eshelby's Problem

1.5.1 Eshelby's Approach

1.5.2 Eshelby's Tensor

1.5.3 Equivalent Inclusion

1.6 Coordinate Transformation

References

2 Plastic Theories of Isotropic Media

2.1 Introduction

2.2 Prandtl-Reuss Elasto-Plastic Theory

2.3 2D Prandtl-Reuss formulae

2.4 Bodner-Partom Unified Plasticity Theory

2.5 Conversion of Bodner-Partom Model into Prandtl-Reuss

Equations

References

3 Bridging Micromechanics Model

3.1 Introduction

3.2 Model Development

3.3 Characterization of Bridging Matrix

3.4 Mori-Tanaka Approach

3.5 Determination of Bridging Matrix

3.6 Effective Elastic Moduli

3.7 Unified Formulae for Elastic Moduli

3.8 Plastic Theory

3.9 Planar Stress Formulae

3.10 Thermal Analysis

References

4 Strength of UnidirectionaIComposites

4.1 Introduction

4.2 Failure Criteria

4.2.1 Strength Theories for Isotropic Materials

4.2.2 Composite Strength Theories

4.3 Strength Formulae under Uniaxial Loads

4.4 Off-axial Strength

4.5 Strength Envelope under Combined Loads

4.6 Strength at Elevated Temperature

4.7 Fatigue Strength and Life Prediction

References

5 Strength of Muitidirectional Laminates

5.1 Introduction

5.2 Stacking Code and Global Coordinates

5.3 Classical Laminate Theory

5.3.1 Isothermal Theory

5.3.2 Convention for Positive Shear Stress

5.3.3 Thermal Analysis

5.3.4 Coupled Thermal-Mechanical Analysis

5.4 Fatal or Nonfatal Failure

5.5 Stiffness Degradation

5.6 Inter-layer in between Adjacent Laminae

5.7 Ultimate Failure criteria

5.8 Pseudo 3D Laminate Theory

5.9 Constituent Properties

5.10 Inelastic Response

5.11 Biaxial Strength Envelope

5.12 Strength Under Thermo-Mechanical Load

5.13 Fatigue Life Prediction

5.14 Prediction for WWFE-I Problems

5.15 Prediction for the WWFE-II Problems

5.16 Concluding Remarks

5.16.1 Laminate Theory

5.16.2 Effect of the Load Application Manner

5.16.3 Definition of Fiber and Matrix Properties

5.16.4 Failure Criteria

5.16.5 Analysis of Composite Structures

5.16.6 Application to Other Kinds of Composites

References

6 Computer Routine Implementation

6.1 Introduction

6.2 Description of the Computer Routine

6.2.1 Main Routine and Data Input Module

6.2.2 Solution Module

6.2.3 Results Module

6.3 Explanation of Input Data

6.4 Original Code of the Computer Routine

6.5 Examples

6.5.1 Example 6-1

6.5.2 Example 6-2

6.5.3 Example 6-3

6.5.4 Example 6-4

Index

内容摘要:

“Strength of Fibrous Composites” addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials.

书籍规格:

书籍详细信息
书名复合材料强度站内查询相似图书
9787308082686
如需购买下载《复合材料强度》pdf扫描版电子书或查询更多相关信息,请直接复制isbn,搜索即可全网搜索该ISBN
出版地杭州出版单位浙江大学出版社
版次1版印次1
定价(元)130.0语种英文
尺寸24 × 17装帧平装
页数印数

书籍信息归属:

复合材料强度是浙江大学出版社于2011.6出版的中图分类号为 TB33 的主题关于 复合材料-材料强度-英文 的书籍。